Polyamide imide Resin Market Forecast and Opportunity Assessment till 2026

Polyamide imide Resin Market Forecast and Opportunity Assessment till 2026

Published Jun 23 



June 23, 2022/IndustryNewsGlobal/ The unexpected shifts in the global markets because of the sudden outbreak of the COVID-19 virus have brought many major and minor tremors to industries of all sizes including the Polyamide imide Resin Market.

It was estimated prior to this unanticipated outbreak that the Polyamide imide Resin Market is likely to witness an impressive Healthy CAGR during the forecast period. PAI resin is the high-performing melt-processable amorphous thermoplastic that offers exceptional mechanical and chemical properties at continuously elevated temperatures of as high as 500o F. The resin is generally polymerized either with aromatic diamine and aromatic acid chloride anhydride (acid chloride route) or with aromatic diisocyanate and anhydride (Diisocyanate route). Currently, PAI resins account for less than 5% (volume basis) of the total high-performance thermoplastics market and less than 1% of the overall thermoplastics market.

At present, the market for high-performance resins along with PAI resin is into the lethal grip of the pandemic, severely affecting the growth of almost all the end-use industries, especially automotive and aerospace. The PAI resin market growth is highly subjected to the organic growth of the automotive, electrical & electronics, and aerospace industries. The demand for PAI resin is likely to plunge by more than 15% in 2020 (YoY) in the wake of the COVID-19 pandemic, crushing the market to the below 2015-level. Most of this decline is likely to be caused by a huge decline in the demand for PAI resins automotive, aerospace, and oil & gas industries which are the worst-affected industries by the pandemic.

On a pre-COVID scenario, the PAI resin market was likely to create a healthy growth opportunity across industry verticals; however, the widespread of COVID-19 across the world has shattered the market hopes in an unprecedented manner. After logging a massive plunge in the demand for PAI resins in the short-term, the market is estimated to rebound quickly, well supported by strong industry fundamentals. An expected recovery in automotive and aircraft production; increasing semiconductor and PCBs market; superior benefits of PAI such as high strength at elevated temperatures, exceptional creep, wear, and chemical resistance over competing thermoplastics and metals; and increasing penetration of high-performance thermoplastics including PAI resin are some key factors that may help to bring back the market charm in the long-term scenario.

To read more about the topic, click here:

Segment Analysis

Based on the product type, Stratview Research has firstly segmented the PAI resin market as molding resin and coating/binder. Molding resin is further segmented into grade type as high-strength PAI and wear-resistant PAI. Concurrently, the molding resin is also broken into process type as extrusion, injection molding, and compression molding. Molding resins lead the total market with a mammoth share. Wear-resistant PAI resin captures a large chunk of the pie. Coating/binder resins typically have solvent content and are formulated into liquid thermoset resin form, being used extensively in electrical & electronics; cookware and home appliances coatings; and to some extent on automotive and industrial coatings or binder applications

Based on the end-use industry type, the PAI Resin market is segmented as aerospace, electrical & electronics, automotive, industrial, and others. Automotive is estimated to remain the leading consumer of PAI resins in the years to come. Transmission and under-the-hood areas are of key application areas of PAI resins with some key applications such as piston seals, wear pads, thrust washers, engine cams, bearings, and seals. An expected recovery in automotive production in the post-pandemic market developments coupled with increased penetration of high-performance resins are estimated to resuscitate the demand for PAI resins in the coming years.

Based on the filler type, the market is segmented as graphite-filled PAI, glass-filled PAI, carbon-filled PAI, and others. Graphite-filled PAI is likely to maintain its dominance during the forecast period. Graphite-filled PAI resin is gaining momentum in wear-prone automotive applications. Glass-filled and carbon-filled PAI are preferably used in high-strength and high-performance applications, such as the aerospace industry.

In terms of regions, North America is estimated to maintain its irrefutable lead in the global PAI resin market over the next five years. The region has the highest penetration of high-performance thermoplastics including PAI resins. The USA is the powerhouse of the market in the region. Asia-Pacific is the largest market for engineered or standard thermoplastics but has a low penetration of high-performance thermoplastics. The emergence of well-known molders for PAI resins in the region is likely to spur the growth of the region’s market in the foreseen future.

Key Players:

Key players operating in the global Polyamide imide Resin market are-

  • Solvay S.A.
  • Toray Industries, Inc.
  • Allnex Netherlands B.V.
  • Toyobo Co Ltd.
  • Elantas
  • Huntsman Corporation
  • Innotek Technology Limited
  • SHOWA DENKO K.K.

Features of the Report

This report offers high-quality insights and is the outcome of detailed research methodology comprising extensive secondary research, rigorous primary interviews with industry stakeholders and validation and triangulation with Stratview Research’s internal database and statistical tools.

The Polyamide imide Resin analysis report discusses the following heads in great detail:

· Market structure: Overview, industry life cycle analysis, supply chain analysis

· COVID-19 Impact Assessment

· Market environment analysis: Growth drivers and constraints, Porter’s five forces analysis, SWOT analysis

· Market trend and forecast analysis

· Market segment trend and forecast

· Competitive landscape and dynamics: Market share, product portfolio, product launches, etc.

· Attractive market segments and associated growth opportunities

· Emerging trends

· Strategic growth opportunities for the existing and new players

· Key success factors

Know more about Stratview Research:

Stratview Research is a global market research company and is known to offer custom research reports in varied fields such as aerospace & Defense, Advanced Materials, Aerospace & Defense, Automotive & Mass Transportation, Consumer Goods, Construction & Equipment, Electronics and Semiconductors, Energy & Utility, Healthcare & Life Sciences, and Oil & Gas. Our team makes sure to have deep research about the topics so that the most useful insights can be delivered to the professionals.

Need a detailed report? Get in touch with us:

Stratview Research

E-mail: sales@stratviewresearch.com

Direct: +1-313-307-4176

News

Advertisement